TY - JOUR
T1 - Zinc-doped hydroxyapatite and poly(propylene fumarate) nanocomposite scaffold for bone tissue engineering
AU - Li, Yong
AU - Liu, Xifeng
AU - Gaihre, Bipin
AU - Li, Linli
AU - Rezaei, Asghar
AU - Miller, A. Lee
AU - Waletzki, Brian
AU - Park, Sungjo
AU - Terzic, Andre
AU - Lu, Lichun
N1 - Funding Information:
This work was supported by the National Institutes of Health Grant No. R01 AR75037.
Publisher Copyright:
© 2022, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
PY - 2022/3
Y1 - 2022/3
N2 - Hydroxyapatite (HA) is a bioceramic material that shares similar crystal and chemical structures with inorganic components of the bone. However, HA lacks osteoinductive activity and has a brittle nature, making it challenging to apply for direct load-bearing bone applications. In this study, we used a wet chemical method to synthesize zinc-doped hydroxyapatite powders with different Zn/(Zn+Ca) molar ratios of 0, 0.025, 0.05, and 0.1. The corresponding Zn-HA was designated as HA, Zn2.5-HA, Zn5-HA, and Zn10-HA. The Zn-HA powders at 30 wt% were used to fabricate poly(propylene fumarate) (PPF)-based nanocomposite scaffolds (HA/PPF, Zn2.5-HA/PPF, Zn5-HA/PPF, and Zn10-HA/PPF). The physical properties of obtained scaffolds were examined by scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Live/dead cell viability assay showed that these scaffolds were biocompatible and supported excellent adhesion of MC3T3-E1 preosteoblast cells. Additionally, the proliferation of cells was detected at 1, 4, and 7 days on these scaffolds. Alkaline phosphatase (ALP) activity measurement and alizarin red staining showed good osteogenic differentiation and matrix mineralization for MC3T3-E1 cells growing on these scaffolds. Taken together, the results here indicate that Zn5-HA/PPF nanocomposite scaffolds are promising scaffold material for bone tissue engineering. Graphical abstract: [Figure not available: see fulltext.]
AB - Hydroxyapatite (HA) is a bioceramic material that shares similar crystal and chemical structures with inorganic components of the bone. However, HA lacks osteoinductive activity and has a brittle nature, making it challenging to apply for direct load-bearing bone applications. In this study, we used a wet chemical method to synthesize zinc-doped hydroxyapatite powders with different Zn/(Zn+Ca) molar ratios of 0, 0.025, 0.05, and 0.1. The corresponding Zn-HA was designated as HA, Zn2.5-HA, Zn5-HA, and Zn10-HA. The Zn-HA powders at 30 wt% were used to fabricate poly(propylene fumarate) (PPF)-based nanocomposite scaffolds (HA/PPF, Zn2.5-HA/PPF, Zn5-HA/PPF, and Zn10-HA/PPF). The physical properties of obtained scaffolds were examined by scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Live/dead cell viability assay showed that these scaffolds were biocompatible and supported excellent adhesion of MC3T3-E1 preosteoblast cells. Additionally, the proliferation of cells was detected at 1, 4, and 7 days on these scaffolds. Alkaline phosphatase (ALP) activity measurement and alizarin red staining showed good osteogenic differentiation and matrix mineralization for MC3T3-E1 cells growing on these scaffolds. Taken together, the results here indicate that Zn5-HA/PPF nanocomposite scaffolds are promising scaffold material for bone tissue engineering. Graphical abstract: [Figure not available: see fulltext.]
UR - http://www.scopus.com/inward/record.url?scp=85125886883&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85125886883&partnerID=8YFLogxK
U2 - 10.1007/s10853-022-06966-7
DO - 10.1007/s10853-022-06966-7
M3 - Article
AN - SCOPUS:85125886883
SN - 0022-2461
VL - 57
SP - 5998
EP - 6012
JO - Journal of Materials Science
JF - Journal of Materials Science
IS - 10
ER -