Intraoperative fractures of the acetabulum during primary total hip arthroplasty

George J. Haidukewych, David J. Jacofsky, Arlen D. Hanssen, David G. Lewallen

Research output: Contribution to journalArticle

54 Citations (Scopus)

Abstract

Background: The intraoperative occurrence of an acetabular fracture is a rare complication of primary total hip arthroplasty. Previous reports have lacked a sufficiently large number of subjects to allow for an analysis of the causes and appropriate treatment of this problem. Methods: Between 1990 and 2000, 7121 primary total hip arthroplasties were performed at our institution. We retrospectively reviewed the records in our Total Joint Registry and found that twenty-one patients (twenty-one hips) had sustained an intraoperative acetabular fracture. Nineteen of these patients (nineteen hips) had been followed until revision or for a minimum of two years (mean duration of follow-up, forty-four months). We evaluated the anatomic location, cause, treatment, and outcome of the fractures. Acetabular component designs were categorized as modular, nonmodular (monoblock), true hemispherical, or elliptical, and then each design was analyzed for fracture risk. Results: No fractures occurred in association with cemented acetabular components. The fracture rate associated with uncemented components was 0.4%. In seventeen hips, the acetabular component was judged to be stable despite the detection of a fracture and the cup was retained. In four hips, the original cup was not stable and therefore was replaced with a design that allowed for supplemental screw fixation. All fractures united, and all cups demonstrated osseous ingrowth at the time of the most recent follow-up. Elliptical monoblock cups were associated with a significantly higher fracture rate than were elliptical modular cups (p < 0.0001) and hemispherical modular cups (p < 0.0001). There was no significant difference between elliptical modular and hemispherical modular components with regard to the fracture rate. Conclusions: Acetabular fracture during primary total hip arthroplasty is a rare complication of acetabular fixation without cement. In the present series, retention of a stable cup was associated with uneventful osseous ingrowth and excellent early-term outcomes. We found a high rate of fracture in association with the use of monoblock elliptical components. Level of Evidence: Therapeutic Level III.

Original languageEnglish (US)
Pages (from-to)1952-1956
Number of pages5
JournalJournal of Bone and Joint Surgery - Series A
Volume88
Issue number9
DOIs
StatePublished - Sep 2006

Fingerprint

Acetabulum
Arthroplasty
Hip
Registries
Joints
Therapeutics

ASJC Scopus subject areas

  • Orthopedics and Sports Medicine
  • Surgery

Cite this

Intraoperative fractures of the acetabulum during primary total hip arthroplasty. / Haidukewych, George J.; Jacofsky, David J.; Hanssen, Arlen D.; Lewallen, David G.

In: Journal of Bone and Joint Surgery - Series A, Vol. 88, No. 9, 09.2006, p. 1952-1956.

Research output: Contribution to journalArticle

Haidukewych, George J. ; Jacofsky, David J. ; Hanssen, Arlen D. ; Lewallen, David G. / Intraoperative fractures of the acetabulum during primary total hip arthroplasty. In: Journal of Bone and Joint Surgery - Series A. 2006 ; Vol. 88, No. 9. pp. 1952-1956.
@article{cf6449e700c148b69bd7af30e6e2c26d,
title = "Intraoperative fractures of the acetabulum during primary total hip arthroplasty",
abstract = "Background: The intraoperative occurrence of an acetabular fracture is a rare complication of primary total hip arthroplasty. Previous reports have lacked a sufficiently large number of subjects to allow for an analysis of the causes and appropriate treatment of this problem. Methods: Between 1990 and 2000, 7121 primary total hip arthroplasties were performed at our institution. We retrospectively reviewed the records in our Total Joint Registry and found that twenty-one patients (twenty-one hips) had sustained an intraoperative acetabular fracture. Nineteen of these patients (nineteen hips) had been followed until revision or for a minimum of two years (mean duration of follow-up, forty-four months). We evaluated the anatomic location, cause, treatment, and outcome of the fractures. Acetabular component designs were categorized as modular, nonmodular (monoblock), true hemispherical, or elliptical, and then each design was analyzed for fracture risk. Results: No fractures occurred in association with cemented acetabular components. The fracture rate associated with uncemented components was 0.4{\%}. In seventeen hips, the acetabular component was judged to be stable despite the detection of a fracture and the cup was retained. In four hips, the original cup was not stable and therefore was replaced with a design that allowed for supplemental screw fixation. All fractures united, and all cups demonstrated osseous ingrowth at the time of the most recent follow-up. Elliptical monoblock cups were associated with a significantly higher fracture rate than were elliptical modular cups (p < 0.0001) and hemispherical modular cups (p < 0.0001). There was no significant difference between elliptical modular and hemispherical modular components with regard to the fracture rate. Conclusions: Acetabular fracture during primary total hip arthroplasty is a rare complication of acetabular fixation without cement. In the present series, retention of a stable cup was associated with uneventful osseous ingrowth and excellent early-term outcomes. We found a high rate of fracture in association with the use of monoblock elliptical components. Level of Evidence: Therapeutic Level III.",
author = "Haidukewych, {George J.} and Jacofsky, {David J.} and Hanssen, {Arlen D.} and Lewallen, {David G.}",
year = "2006",
month = "9",
doi = "10.2106/JBJS.E.00890",
language = "English (US)",
volume = "88",
pages = "1952--1956",
journal = "Journal of Bone and Joint Surgery - American Volume",
issn = "0021-9355",
publisher = "Journal of Bone and Joint Surgery Inc.",
number = "9",

}

TY - JOUR

T1 - Intraoperative fractures of the acetabulum during primary total hip arthroplasty

AU - Haidukewych, George J.

AU - Jacofsky, David J.

AU - Hanssen, Arlen D.

AU - Lewallen, David G.

PY - 2006/9

Y1 - 2006/9

N2 - Background: The intraoperative occurrence of an acetabular fracture is a rare complication of primary total hip arthroplasty. Previous reports have lacked a sufficiently large number of subjects to allow for an analysis of the causes and appropriate treatment of this problem. Methods: Between 1990 and 2000, 7121 primary total hip arthroplasties were performed at our institution. We retrospectively reviewed the records in our Total Joint Registry and found that twenty-one patients (twenty-one hips) had sustained an intraoperative acetabular fracture. Nineteen of these patients (nineteen hips) had been followed until revision or for a minimum of two years (mean duration of follow-up, forty-four months). We evaluated the anatomic location, cause, treatment, and outcome of the fractures. Acetabular component designs were categorized as modular, nonmodular (monoblock), true hemispherical, or elliptical, and then each design was analyzed for fracture risk. Results: No fractures occurred in association with cemented acetabular components. The fracture rate associated with uncemented components was 0.4%. In seventeen hips, the acetabular component was judged to be stable despite the detection of a fracture and the cup was retained. In four hips, the original cup was not stable and therefore was replaced with a design that allowed for supplemental screw fixation. All fractures united, and all cups demonstrated osseous ingrowth at the time of the most recent follow-up. Elliptical monoblock cups were associated with a significantly higher fracture rate than were elliptical modular cups (p < 0.0001) and hemispherical modular cups (p < 0.0001). There was no significant difference between elliptical modular and hemispherical modular components with regard to the fracture rate. Conclusions: Acetabular fracture during primary total hip arthroplasty is a rare complication of acetabular fixation without cement. In the present series, retention of a stable cup was associated with uneventful osseous ingrowth and excellent early-term outcomes. We found a high rate of fracture in association with the use of monoblock elliptical components. Level of Evidence: Therapeutic Level III.

AB - Background: The intraoperative occurrence of an acetabular fracture is a rare complication of primary total hip arthroplasty. Previous reports have lacked a sufficiently large number of subjects to allow for an analysis of the causes and appropriate treatment of this problem. Methods: Between 1990 and 2000, 7121 primary total hip arthroplasties were performed at our institution. We retrospectively reviewed the records in our Total Joint Registry and found that twenty-one patients (twenty-one hips) had sustained an intraoperative acetabular fracture. Nineteen of these patients (nineteen hips) had been followed until revision or for a minimum of two years (mean duration of follow-up, forty-four months). We evaluated the anatomic location, cause, treatment, and outcome of the fractures. Acetabular component designs were categorized as modular, nonmodular (monoblock), true hemispherical, or elliptical, and then each design was analyzed for fracture risk. Results: No fractures occurred in association with cemented acetabular components. The fracture rate associated with uncemented components was 0.4%. In seventeen hips, the acetabular component was judged to be stable despite the detection of a fracture and the cup was retained. In four hips, the original cup was not stable and therefore was replaced with a design that allowed for supplemental screw fixation. All fractures united, and all cups demonstrated osseous ingrowth at the time of the most recent follow-up. Elliptical monoblock cups were associated with a significantly higher fracture rate than were elliptical modular cups (p < 0.0001) and hemispherical modular cups (p < 0.0001). There was no significant difference between elliptical modular and hemispherical modular components with regard to the fracture rate. Conclusions: Acetabular fracture during primary total hip arthroplasty is a rare complication of acetabular fixation without cement. In the present series, retention of a stable cup was associated with uneventful osseous ingrowth and excellent early-term outcomes. We found a high rate of fracture in association with the use of monoblock elliptical components. Level of Evidence: Therapeutic Level III.

UR - http://www.scopus.com/inward/record.url?scp=33748473005&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33748473005&partnerID=8YFLogxK

U2 - 10.2106/JBJS.E.00890

DO - 10.2106/JBJS.E.00890

M3 - Article

VL - 88

SP - 1952

EP - 1956

JO - Journal of Bone and Joint Surgery - American Volume

JF - Journal of Bone and Joint Surgery - American Volume

SN - 0021-9355

IS - 9

ER -