Endurance test of a sunflower oil/diesel fuel blend

M. Ziejewski, K. R. Kaufman

Research output: Contribution to journalConference article

Abstract

Two endurance tests were completed on a diesel engine in the Allis Chalmers Engine Division at Harvey, Illinois. The two tests included a 500 hour baseline test with #2 diesel fuel and a 600 hour test with a 50/50 (v/v) blend of alkali refined sunflower oil and #2 diesel fuel. A continuous test cycle of three minutes at high idle and 10 minutes at peak torque was used. There were no significant problems with engine operation during the baseline test. However, problems were experienced while operating on the blended fuel. While using the blended fuel (1) there was abnormal carbon buildup on the injection nozzle tip, (2) the nozzle opening pressure dropped 10-15%, (3) the injection nozzle needles stuck, (4) there was excessive carbon buildup on the intake ports, (5) operation problems of the turbocharger were observed, and (6) piston ring sticking problems were experienced.

Original languageEnglish (US)
JournalSAE Technical Papers
DOIs
StatePublished - Jan 1 1982
EventInternational Congress and Exposition - Detroit, MI, United States
Duration: Feb 22 1982Feb 26 1982

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Endurance test of a sunflower oil/diesel fuel blend'. Together they form a unique fingerprint.

  • Cite this