An electron-beam ct approach for transvenous coronary arteriography

Paul J. Thomas, Cynthia H McCollough, Erik L. Ritman

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Objective: The goal is to image the 3D anatomy of the major coronary arteries within a single breath-hold and using a single intravenous injection of contrast agent. Materials and Methods: With use of an electron-beam CT (EBCT) scanner, operated in its multislice scan mode (using all four target rings, each scanning two nominal 8 mm thick slices in a total time interval of 224 ms), a radiologically realistic thorax phantom containing a heart with coronary arteries (opacified with 40 mg iodine/ml) was scanned six times with the patient table advanced by a 2 mm step into the scanner between each scan. The normalized and scaled sinogram data were transferred to an off-line computer and reconstructed using our own implementation of a 3D algebraic reconstruction technique that takes into account the exact 3D relationship of the X-ray source and detector elements of the EBCT. Results: A single volume image consisting of 40 slices, at 2 mm intervals and each uniformly 3.7 mm thick, depicted the lumina of the coronary arteries with greater anatomic detail than the “original” images at 8 mm, primarily because of the reduced partial volume effect. Conclusion: Our preliminary results suggest that EBCT, operated in multislice scan mode, may be useful for transvenous coronary angiography performed within a single breath-hold.

Original languageEnglish (US)
Pages (from-to)379-382
Number of pages4
JournalJournal of Computer Assisted Tomography
Volume19
Issue number3
StatePublished - 1995

Fingerprint

Coronary Vessels
Angiography
Electrons
Coronary Angiography
Intravenous Injections
Iodine
Contrast Media
Anatomy
Thorax
X-Rays

Keywords

  • Angiography
  • Computed tomography
  • Computed tomography, techniques
  • Three-dimensional

ASJC Scopus subject areas

  • Radiology Nuclear Medicine and imaging

Cite this

An electron-beam ct approach for transvenous coronary arteriography. / Thomas, Paul J.; McCollough, Cynthia H; Ritman, Erik L.

In: Journal of Computer Assisted Tomography, Vol. 19, No. 3, 1995, p. 379-382.

Research output: Contribution to journalArticle

@article{24a2db92cdd643f0a4fdf79055289e53,
title = "An electron-beam ct approach for transvenous coronary arteriography",
abstract = "Objective: The goal is to image the 3D anatomy of the major coronary arteries within a single breath-hold and using a single intravenous injection of contrast agent. Materials and Methods: With use of an electron-beam CT (EBCT) scanner, operated in its multislice scan mode (using all four target rings, each scanning two nominal 8 mm thick slices in a total time interval of 224 ms), a radiologically realistic thorax phantom containing a heart with coronary arteries (opacified with 40 mg iodine/ml) was scanned six times with the patient table advanced by a 2 mm step into the scanner between each scan. The normalized and scaled sinogram data were transferred to an off-line computer and reconstructed using our own implementation of a 3D algebraic reconstruction technique that takes into account the exact 3D relationship of the X-ray source and detector elements of the EBCT. Results: A single volume image consisting of 40 slices, at 2 mm intervals and each uniformly 3.7 mm thick, depicted the lumina of the coronary arteries with greater anatomic detail than the “original” images at 8 mm, primarily because of the reduced partial volume effect. Conclusion: Our preliminary results suggest that EBCT, operated in multislice scan mode, may be useful for transvenous coronary angiography performed within a single breath-hold.",
keywords = "Angiography, Computed tomography, Computed tomography, techniques, Three-dimensional",
author = "Thomas, {Paul J.} and McCollough, {Cynthia H} and Ritman, {Erik L.}",
year = "1995",
language = "English (US)",
volume = "19",
pages = "379--382",
journal = "Journal of Computer Assisted Tomography",
issn = "0363-8715",
publisher = "Lippincott Williams and Wilkins",
number = "3",

}

TY - JOUR

T1 - An electron-beam ct approach for transvenous coronary arteriography

AU - Thomas, Paul J.

AU - McCollough, Cynthia H

AU - Ritman, Erik L.

PY - 1995

Y1 - 1995

N2 - Objective: The goal is to image the 3D anatomy of the major coronary arteries within a single breath-hold and using a single intravenous injection of contrast agent. Materials and Methods: With use of an electron-beam CT (EBCT) scanner, operated in its multislice scan mode (using all four target rings, each scanning two nominal 8 mm thick slices in a total time interval of 224 ms), a radiologically realistic thorax phantom containing a heart with coronary arteries (opacified with 40 mg iodine/ml) was scanned six times with the patient table advanced by a 2 mm step into the scanner between each scan. The normalized and scaled sinogram data were transferred to an off-line computer and reconstructed using our own implementation of a 3D algebraic reconstruction technique that takes into account the exact 3D relationship of the X-ray source and detector elements of the EBCT. Results: A single volume image consisting of 40 slices, at 2 mm intervals and each uniformly 3.7 mm thick, depicted the lumina of the coronary arteries with greater anatomic detail than the “original” images at 8 mm, primarily because of the reduced partial volume effect. Conclusion: Our preliminary results suggest that EBCT, operated in multislice scan mode, may be useful for transvenous coronary angiography performed within a single breath-hold.

AB - Objective: The goal is to image the 3D anatomy of the major coronary arteries within a single breath-hold and using a single intravenous injection of contrast agent. Materials and Methods: With use of an electron-beam CT (EBCT) scanner, operated in its multislice scan mode (using all four target rings, each scanning two nominal 8 mm thick slices in a total time interval of 224 ms), a radiologically realistic thorax phantom containing a heart with coronary arteries (opacified with 40 mg iodine/ml) was scanned six times with the patient table advanced by a 2 mm step into the scanner between each scan. The normalized and scaled sinogram data were transferred to an off-line computer and reconstructed using our own implementation of a 3D algebraic reconstruction technique that takes into account the exact 3D relationship of the X-ray source and detector elements of the EBCT. Results: A single volume image consisting of 40 slices, at 2 mm intervals and each uniformly 3.7 mm thick, depicted the lumina of the coronary arteries with greater anatomic detail than the “original” images at 8 mm, primarily because of the reduced partial volume effect. Conclusion: Our preliminary results suggest that EBCT, operated in multislice scan mode, may be useful for transvenous coronary angiography performed within a single breath-hold.

KW - Angiography

KW - Computed tomography

KW - Computed tomography, techniques

KW - Three-dimensional

UR - http://www.scopus.com/inward/record.url?scp=84939111335&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84939111335&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84939111335

VL - 19

SP - 379

EP - 382

JO - Journal of Computer Assisted Tomography

JF - Journal of Computer Assisted Tomography

SN - 0363-8715

IS - 3

ER -